Updates

Let there be Data!

First Data Collection on 24-ID-E

Two of the major milestones in commissioning a beamline have been achieved on 24-ID-E at NE-CAT.  On August 9, 2024, x-rays were delivered by the APS through the Sector 24 front end. Using an ultrasensitive camera focused through a port of the monochromator, APS physicists detected the beam on the monochromator silicon crystals of both 24-ID-C and 24-ID-E. Though the focus was rough, NE-CAT was able to observe the beam.  After the September shutdown, Dr. Malcolm Capel was able to carefully steer the beam through the experimental hutches to the sample position over the next two months.

Tags: 

Hurray for Beam!

The Advanced Photon Source has begun commissioning the new storage ring and as of Thursday, April 12, there is beam in the first few meters of the storage ring. To see the most recent updates by the Advanced Photon Source, check out the Upgrade website.

Tags: 

Steps for Returning to Operations

As of the end of March 2024, the APS is undergoing Accelerator Readiness Review prior to turning on the new storage ring.  This is the second review of the upgrade.  The DOE Office of Project Assessment has already reviewed the upgrade in mid-March.  In parallel to the APS preparing to commission the new storage ring, NE-CAT has been preparing for a return to operations.
 
Tags: 

Sector 24 Update

Kay Perry standing in front of the Sector 24 module

Last Fall, the APS offered staff and resident users the ability to tour the synchrotron storage ring while it was being assembled.  In October, the magnets for Sector 24 were in place and proof is in the picture of Kay Perry standing in front of them during the tour.  Behind her, the yellow curtain marks Sector 23 components which were undergoing bake out to remove everything which could interfere with vaccuum.  Prior to Laboratory closure for the holidays, the front ends were slotted into the place and the last (of the 200) modules were been installed.

Tags: 

Office Hours

Questions?

....Answers Provided.

 

Zoom-based office hours to answer questions regarding using NE-CAT, data processing, structure solution or anything else x-ray crystallography-related available weekly.

Thursday, 1:00 - 3:00 PM Central Time

Request the Zoom link via email.